Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Cap & Crown in Fairfield: What to Know First
We provide independent Olympia Chimney chimney cap and crown service in Fairfield, with most inspections booked within a few days and repairs completed in a single visit. A standard Olympia Chimney cap replacement runs $280-$520; crown repair or coating typically falls between $340-$780 depending on access and extent of damage. We use professional-grade materials from Olympia Chimney, Gelco, and Copperfield, and we never recommend work without camera evidence you can see for yourself.
This page is for Fairfield homeowners who already have an Olympia Chimney component on their roof and need straightforward answers about what is failing, what it will cost, and who can fix it without the runaround. If that sounds like your situation, call (475) 251-7537 and a live person will pick up, any hour of any day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney Gelco single-flue caps in the N series develop stress fractures at the corner welds after seven to ten Fairfield winters. The freeze-thaw cycle here is harder on thin-gauge factory caps than the manufacturer acknowledges. We replace with a heavier-gauge Gelco equivalent or step up to a Copperfield multi-flue cap with a lifetime warranty on the mesh.
- Olympia Chimney’s standard galvanized caps on coastal Fairfield properties, especially south of I-95 where salt air sits heavier, show rust-through at the drip edge in four to six years. The factory powder coat holds on the top but fails at the underside where condensation collects. We pull the cap, assess the flue tile condition, and install a stainless or copper cap with a proper overhang that sheds water away from the crown.
- The Olympia Chimney pour-in-place crown mix is workable for new construction but cures too soft for Fairfield’s temperature swings. We’ve opened crowns that looked fine from the ground and found the substrate crumbled to sand underneath. We remove the failed material, re-form with a proper Portland-based crown mix, and seal with a breathable silicone treatment that handles the humidity.
- Olympia Chimney multi-flue caps with the factory spark arrestor clog with creosote faster than single-flue units because the reduced mesh area creates a bottleneck. In older Fairfield homes with offset flues, this accelerates draft problems. We clean the flue system first, then specify a cap with larger mesh area or a top-sealing damper integration if the fireplace is the primary heat source.
- Crown separation at the flue tile interface is common on Olympia Chimney systems where the original installer skipped the expansion joint. Fairfield’s clay soil shifts; the chimney moves; the crown cracks vertically right at the flue. We cut a proper reglet, install a flexible seal, and re-float the crown with a bond break so the next shift does not telegraph through.
Our Olympia Chimney Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers, checks our calendar, and books a Level-2 camera inspection. We confirm the $89 Seasonal Tune-Up applies if you also need a sweep.
- 2
On-site diagnosis. Our tech arrives in uniform, sets up the camera, and documents the cap, crown, and flue condition. You see the footage on a tablet as we explain what we are looking at.
- 3
Parts decision. If your Olympia Chimney cap is under warranty and the failure is a defect, we note that for your claim. Otherwise we quote OEM or quality aftermarket options, your choice, with the price difference explained plain.
- 4
The repair. Most cap replacements and crown coatings finish in two to four hours. Crown rebuilds may need a return visit if weather does not cooperate. If it’s not right, we don’t leave.
- 5
Testing and documentation. We run a draft test, verify water shedding with a hose check where accessible, and email you the photos with a written summary.
- 6
Guarantee in writing. The 90-Day Done Right Promise covers the work. If something shifts or leaks, we come back. No paperwork to find, no argument.
What Olympia Chimney Chimney Cap & Crown Costs in Fairfield
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia Chimney cap replacement (single flue) | $280-$420 | Stainless vs. copper, flue tile condition, roof pitch |
| Olympia Chimney cap replacement (multi-flue) | $380-$520 | Custom sizing, spark arrestor type, access difficulty |
| Crown coating (Olympia Chimney or other) | $340-$580 | Crown square footage, number of flues, prep work |
| Crown rebuild | $680-$1,240 | Scaffolding needs, flue tile replacement, weather delay |
| Cap + crown combined service | $620-$1,100 | Package pricing applies; senior/veteran discount stacks |
These are Fairfield market ranges based on what we have billed over the past three years. Your exact price comes after we see the chimney. Estimates are free, and the number on the estimate is the number on the invoice. Call (475) 251-7537 for an exact quote.
Why Fairfield Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We are an independent Olympia Chimney service provider, not a factory-authorized dealer, which means we work for you, not the manufacturer. When an Olympia Chimney cap fails outside warranty, we can source the OEM part or a quality equivalent from Gelco or Copperfield and tell you honestly which makes sense.
Russell Haines and our crew have been in Fairfield long enough to know the older colonial homes along Greenfield Hill have chimneys as particular as their owners. We document every inspection with photos and a plain-English verdict. Our technicians are background-checked and uniformed, most jobs finish in one visit, and a live person answers the phone at 2 AM on a Sunday because that is what we have done for over 42 years. The 90-Day Done Right Promise is in writing, no arguing. Done right, and we stand behind it.
FAQs
No, independent repair does not void the warranty if the work is done correctly and documented. We note any factory defect we find so you can file a claim with Olympia Chimney if the part is still under coverage. For warranty-safe practices, we use compatible fasteners and do not modify the flue tile in ways that would complicate a future claim. Call (475) 251-7537 and we will review your warranty status before booking.
We stock common Olympia Chimney cap sizes and can source specialty items within a few business days. You do not need to order anything yourself. If an aftermarket cap from Gelco or Copperfield fits better and costs less, we will show you both options with the price difference explained. Call (475) 251-7537 for availability on your specific model.
If the crown has hairline cracks but the substrate is solid, a coating extends its life five to seven years. If the crown is crumbling, separating from the flue tile, or leaking into the attic, it needs rebuild. We make that call with the camera and a probe, not from the ground. Call (475) 251-7537 for a free inspection and an honest verdict on whether work can wait.
Most cap replacements book within two to five days, and the work itself takes two to four hours. We do not promise same-day dispatch because we would rather schedule properly than rush and leave you with a sloppy install. In burning season, call early. Call (475) 251-7537 to hold your spot.
A cracked crown lets water into the chimney structure, which causes liner deterioration, masonry damage, and in worst cases, carbon monoxide leakage through compromised flue tiles. That said, not every crack is an emergency. We categorize it by what the camera shows: monitor, repair this season, or address before next burn. You get the photos and our recommendation, no pressure. Call (475) 251-7537 for a free estimate.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Fairfield and nearby areas.





Before
After
Before
After
Before
After