Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Fireplace Services in Fairfield: What to Know First
We provide independent Olympia Chimney fireplace services in Fairfield, from gas valve troubleshooting to firebox rebuilds on wood-burning units, with most repairs completed in a single visit and upfront pricing before any work begins. Our Level-2 camera inspection runs $289-$389 for Olympia Chimney systems, and we’ll tell you straight when a repair can wait or when it can’t.
This page is for Fairfield homeowners who bought an Olympia Chimney fireplace, insert, or gas log set and need a technician who knows the difference between an OPD-2000 series venting fault and a standard thermocouple failure. We are not affiliated with or authorized by Olympia Chimney. We are an independent Olympia Chimney service provider with 42 years of documented repair history and the 90-Day Done Right Promise in writing. If your fireplace isn’t drafting, won’t stay lit, or you’re smelling smoke in the room, call (475) 251-7537. A live person answers, 24 hours a day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
- OPD-2000 Series: Failed ignition module in cold-start conditions. The OPD-2000 direct-vent gas fireplaces common in Greenfield Hill split-levels from the early 2000s use a Fenwal ignition module that weakens after 8-12 Fairfield winters. The symptom is intermittent pilot light, often misdiagnosed as a bad thermopile. We test module output with a manometer first, then source the correct Fenwal replacement or a tested-compatible aftermarket unit. The fix takes about 90 minutes once diagnosed.
- OPW-3000 Wood-Burning Fireplaces: Cracked refractory panels behind the firebrick. The OPW-3000’s factory refractory panels are thinner than comparable HeatShield-backed systems and develop hairline cracks after repeated thermal cycling in Fairfield’s freeze-thaw climate. We photograph every crack during inspection, replace with Olympia Chimney OEM panels or a thicker aftermarket refractory set where clearance allows, and re-seal with proper refractory cement rated to 2,500°F.
- Inserts: Warped faceplate gasket causing smoke seepage. Olympia Chimney inserts installed in Fairfield’s pre-1970 masonry fireplaces often have compressed or brittle faceplate gaskets after 15+ years. The tell is a faint smoke smell during startup, not a visible leak. We carry replacement gaskets in common widths, match the original compression spec, and verify seal with a smoke pencil test before we leave.
- Gas Log Sets: Clogged pilot orifice from coastal moisture. Fairfield’s proximity to Long Island Sound means higher ambient moisture than inland Connecticut, and Olympia Chimney’s standard pilot orifice can develop corrosion deposits that narrow the gas flow. We clean with proper orifice tools, never drill out (which voids any remaining warranty and risks over-firing), and install a moisture-resistant cap where the original design allows.
- OPD-2000 Venting: Restricted termination cap from ice damming. The low-profile termination cap on OPD-2000 systems can ice over during Fairfield’s March freeze-thaw cycles, causing pressure switch faults and shutdown. We clear the restriction, verify proper slope on the vent run, and where the installation geometry permits, swap to a Gelco high-wind termination that sheds ice better than the original design.
Our Olympia Chimney Fireplace Services Process
- 1
Call and schedule. A live person answers at (475) 251-7537, 24 hours a day. We ask the model series if you know it, the symptoms, and whether the unit is gas or wood-burning. Most Fairfield appointments are set within 48 hours.
- 2
Level-2 camera inspection. Our technician arrives in uniform, background-checked, and photographs the firebox, flue, damper, and venting. You see the images on a tablet. We deliver a plain-English verdict: what’s wrong, what it costs, and what can safely wait.
- 3
Parts decision. For Olympia Chimney units, we source OEM parts when available and cost-justified. When Olympia Chimney backorders a part (common on older OPW-3000 refractory panels), we use quality aftermarket from DuraFlex, HeatShield, or Gelco that matches or exceeds original spec. We explain the choice and the price difference before ordering.
- 4
Repair and test. Most repairs finish in one visit. Gas systems get a full combustion analysis. Wood-burning units get a draft test and smoke-pencil verification. If it’s not right, we don’t leave.
- 5
Documentation and guarantee. You receive photos, the inspection report, and the 90-Day Done Right Promise in writing. No paperwork to file. If something isn’t right, we come back. No arguing.
- 6
Cleanup. We tarp the work area, vacuum with HEPA filtration, and leave the hearth cleaner than we found it.
What Olympia Chimney Fireplace Services Costs in Fairfield
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Level-2 inspection with camera | $289-$389 | Roof access difficulty, number of flues |
| Gas fireplace tune-up (OPD-2000 series) | $189-$279 | Parts replacement, combustion analysis |
| Thermocouple / thermopile replacement | $245-$375 | Accessibility, OEM vs. aftermarket |
| Refractory panel replacement (OPW-3000) | $680-$1,150 | Panel count, aftermarket upgrade |
| Fireplace insert gasket service | $195-$340 | Faceplate removal complexity |
| Gas log set orifice cleaning / repair | $165-$265 | Corrosion severity, cap replacement |
| Termination cap upgrade to Gelco | $320-$495 | Height, existing vent condition |
We charge no diagnostic fee when you proceed with recommended repair. Our $89 Seasonal Tune-Up applies to gas fireplace systems in good working order. Seniors and veterans receive 5% off every job, every day. Call (475) 251-7537 for a free estimate - the number we quote is the number on the invoice.
Why Fairfield Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
Fairfield homeowners have called us for 42 years because we document what we find, explain it in plain English, and stand behind the result. The 90-Day Done Right Promise means if it’s not right, we make it right - in writing, no arguing, no paperwork to track down. Our technicians are background-checked, uniformed, and trained on Olympia Chimney’s specific venting geometries, ignition systems, and common failure modes. When an Olympia Chimney part is unavailable, we draw on professional-grade alternatives from DuraFlex, HeatShield, and Gelco - never builder-grade substitutes. Russell Haines and his crew have worked the older colonial homes along Greenfield Hill long enough to know which chimney configurations hide surprises and which don’t. We’ll be there when we say. Photos you can see. A plain-English verdict. A square deal: no surprises on the bill.
FAQs
No, routine service and repair by a qualified independent technician does not void your Olympia Chimney warranty, provided OEM parts are used where specified and installation follows factory guidelines. We document parts origin and installation method for your records. If warranty coverage is still active, we flag it so you can make an informed choice. Call (475) 251-7537 for a free estimate.
OEM parts for current Olympia Chimney models typically arrive in 3-5 business days. Discontinued OPW-3000 refractory panels and older OPD-2000 ignition modules can take 2-3 weeks or longer. We stock common aftermarket equivalents from HeatShield and DuraFlex to complete urgent repairs same-day when safety is a factor. We’ll tell you the real timeline before you commit.
Replace when repair costs exceed 60% of a new comparable unit, when the firebox is structurally compromised, or when parts are permanently unavailable. Repair when the issue is localized to a replaceable component, the venting system is sound, and the unit meets your heating needs. Our camera inspection gives you the data to decide. We do not sell fireplaces, so our recommendation carries no commission incentive. Call (475) 251-7537 for an honest assessment.
Yes, we service Olympia Chimney inserts installed in both masonry and prefabricated metal fireboxes, though the clearance requirements and venting adapters differ. Prefab installations require specific connector compatibility that we verify during inspection. We’ve completed this work in Fairfield’s 1980s-era raised ranches where prefab metal fireplaces are common.
Annually, before the heating season begins. Gas fireplaces burn cleaner than wood but still accumulate debris on burners, develop pilot orifice restrictions, and experience valve seal wear. Fairfield’s coastal moisture accelerates corrosion on vent terminations and pilot assemblies. Annual service prevents mid-winter failures and maintains safe combustion. Our $89 Seasonal Tune-Up covers standard cleaning and safety checks. Call (475) 251-7537 to schedule.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Fairfield and nearby areas.





Before
After
Before
After
Before
After